Installing an Oil Seal – Step by Step
Prior to Oil Seal Installation
這油封應該經過全麵檢查,以確保沒有缺陷或畸形。OD上的一個非常小的劃痕可能導致密封件泄漏。評估孔以確認不存在擦傷或殘留物。密封和軸應潤滑,以確保首次運行期間的唇部保護。
安裝方法
建議在安裝旋轉軸密封件時使用的油封安裝工具,以促進適當的接合並降低密封豎起的可能性。使用壓力機(優選地氣動或液壓機)時,請確保工具的OD .01“(.25mm)小於孔徑的大小。
Seal Cocking:
密封豎起是當密封唇的一側具有更大的軸幹擾時,這可能會對油封的功能產生負麵影響。這導致發熱更高,使密封唇硬化和裂紋。在更糟糕的情況下,這可以從密封唇中脫臼彈簧。
彈回:
使用橡膠覆蓋的OD時,密封件可以在安裝後彈回。密封橡膠和孔的橡膠產生摩擦,並在被壓入後,可以導致密封從安裝點退出。
適當的安裝方式
Housing Surface Stop Installation:
- 這bottom of the installation tool meets the machined housing face.
Housing Stop Installation:
- 密封件的底部與孔的內部肩部齊平。
表麵停止安裝:
- 這bottom of the installation tool meets the machined housing face.
Installation of Seal Over Splines:
- 安裝工具是潤滑的,防止海豹,鍵槽和未經控製的軸損壞。
罷工板安裝:
- 在安裝密封時,謹慎地確保密封和孔正常對齊。
Shaft Stop Installation:
- 安裝工具的底部符合軸的臉部。
不恰當的安裝方式
下麵描述的是安裝油封的不正確方法。然而,這些錯誤是相當經常看到的,然而不一定理解也不應該在行業內譴責。安裝不正確的油封可以損壞和扭曲,從而降低其功能。安裝不當,它將在鑽孔中翹起並在服務中失敗。
駕駛不正確:
Use a suitable driving ring while installing a seal. Utilizing an inappropriate driving ring can cause deformation and misalignment of the seal.
尺寸的安裝工具:
如果安裝工具的駕駛直徑太小,這可能導致密封在安裝過程中變形。
工程不足的安裝工具:
如果安裝工具不正確,這可能會導致變形。
錯位錯誤:
If the tool and bore do not meet evenly, the seal can become deformed and/or cocked in the bore. Thus, creating a leak path for the matter being sealed.